PALIO® is a vertebral body replacement implant used for stabilisation and reconstruction of the cervical spine (C3 – C7). It is used following cervical corpectomy with anterior access in case of instability and constrictions due to various underlying causes.
- Medical titanium alloy
- Toothed surface
- Straight and lordotic implant design
PALIO® is inserted in the C3 – C7 cervical spinal region with anterior access. Along with simple implantation, the large supporting surface and the generous fenestration encourage stability as well as osseointegration of the implant. The choice between straight or lordotic end rings enables optimal reconstruction of the natural spinal anatomy.
The inserted cage must be fixed with additional stabilisation. This is carried out using an anterior CS plate, for example, with the anterior fixation systems ASCOT® or TOSCA®, which can be optionally fixed to the cage with an additional screw.
The PALIO® basic body is available in different lengths and can be trimmed during surgery to the desired height. This enables the implant to be adapted to the anatomy and pathology of the patient.
Benefits:
Two basic bodies for many options
- Heights of 16-62 mm in 2 mm increments
- Easy to adapt to the anatomical and pathological situation by trimming
Straight and lordotic implant design
- Optimal reconstruction of the natural spine anatomy
Large supporting surface combined with generous fenestration
- Good implant stability while also promoting osseointegration
Proven SIGNUS toothed cage design
- Secure anchoring in the bone thanks to high primary stability
- Reduced risk of implant migration
SIGNUS modular solution
- Perfectly compatible with the pre-contoured ASCOT® and TOSCA® CS plats, which can be screwed onto the PALIO® implant
About SIGNUS
SIGNUS – the Sign for Spine: Passionate! Dynamic! Worldwide!
Innovative high-end implants made in Germany: For more than 25 years, SIGNUS has been the experienced specialist for comprehensive solutions in the surgical spine care sector. Founded in 1994 in Germany’s Lower Franconian city of Alzenau by Susanne and Uwe Siedler, our family-owned company currently has staff of approx. 80 at sites in Germany and Australia. SIGNUS offers the comprehensive product range of cervical spine to SIG sacroiliac joints, which are predominately manufactured at the nearby production site of ProConMedizintechnik. In addition to Europe (CE) and the USA (FDA), we sell our certified implants throughout the world on every continent. Target-oriented further development of the products in connection with the continuous exchange with the users as well as international further education and hospitalisation programs make SIGNUS a reliable global partner.
The entire SIGNUS Portfolio with detailed information and descriptions are available for you online at www.signus.com