Midline Cervical Plates

In biomechanically justified cases, there may be a need for additional stabilization, then disc prosthesis can be used with the ”Madagascar” cervical plate. This leads to simultaneous intervertebral and vertebral stabilization of one segment of the cervical spine (anterior surgical approach). The anatomic and low profile cervical plate is equipped with a central hole for the connecting thread […]

Anodyne-Single provides an efficient ACDF plating solution with a single point of fixation per level. Features: Patented one-step locking mechanism Narrow midline plate design Variable screws provide a 22° range of sagittal angulation 1 & 2 Level Plate Availability (13mm – 40mm mainly in 2mm increments) Screw Lengths: 12mm – 20mm Screw Diameters: 4.6mm & […]

The Aptitude Cervical Plates feature a slim profile design allowing for a smooth anterior service. The simple and intuitive one-step locking mechanism facilitates complete control by the surgeon during the procedure. The Aptitude system offers streamlined instrumentation to accommodate the needs of the patients and surgeons. Features: ABOUT CURITEVA Curiteva is a privately held technology […]

The Anterior Cervical Spine Plate Ⅲ is designed with double and single line, bending zones, maximized visibility window, locking structure, low profile, variable and fixed angle screws, anti-slippage teeth to provide solutions fordegenerative disc disease, trauma,tumors,deformity (defined as kyphosis, lordosis, or scoliosis),pseudarthrosis, failed previous fusions and so on. Features: Indications: Indicated for stabilization of the […]

The Ceres Midline Cervical Plate is a slim 2.3mm titanium plating system intended for anterior screw fixation of the cervical spine as an adjunct to fusion.  Features: Simplicity Countless Possibilities About Spinal Elements Spinal Elements is a Carlsbad, California based medical device company focused on the design, development, and commercialization of a comprehensive portfolio of […]

The Hana Anterior Cervical Plate System consists of various sizes of plates, screws and associated instruments. One screw per level allows for small incisions and less retraction compared to the traditional Anterior Cervical Plate. The posterior teeth provide plate-to-bone contact for stabilization. The lock-plate is assembled to the main plate and designed to prevent screws […]

Helix mini acp-Brochure.Nuvasive.pdf Features: Fixed- and Variable-Angle Bone Screws for the perfect construct type, depending on patient needs. Variable-Angle Bone Screws feature a 20º cone-of-angulation to accommodate surgeon needs. NuVasive Helix Mini ACP Plate has a 2.4mm profile to reduce the chance of postoperative discomfort. Plate sizes accommodate 1- and 2-Level construct needs Benefits: Easy […]

Midline-Cervical-Plate-Brochure.Zavation.pdf Features: Low profile design • Simple, visual, and tactile 1/4 turn locking of each screw using the same driver as used for inserting screws • 8° caudal and cephalad biased angles • ±10° variable angle (4.0mm screw) • Screws available: variable, fixed, self-drilling, & self-tapping Slim profile design: Simple, visual, and tactile 1/4 turn […]

The NEO-UL Anterior Cervical Plate System is designed to simplify anterior cervical discectomy and fusions through the use of a narrow one or two level midline plate and streamlined surgical technique.  The system features one point of midline fixation per vertebral body for improved graft visualization, minimized lateral retraction of soft tissue and potentially reduced […]

The Pyrenees Mono Cervical Plate System offers a slim-profile design that allows for less lateral retraction for plate placement than a wider cervical plate. Featuring SMARTLock Technology, the system does not require an additional locking mechanism. Pyrenees Cervical Plates (including Mono Cervical)(K2M Old version) VIDEO ANIMATION Features: Slim-profile design that allows for less lateral retraction […]

The SpineNet SSP™ (Single Screw Plate) System offers maximum implant versatility and integrated instrumentation. Features: Plate Screws About SpineNet SpineNet is an Orlando, Florida-based limited liability corporation. SpineNet was founded in 2007 as a distribution company that rapidly grew into a product developer, manufacturer, and importer.http://www.spinenetllc.com/

The Slimplicity® SOLO Anterior Cervical Plate System is designed to enhance a narrow midline approach to ACDF procedures. A midline approach allows for more centered screw placement, while minimizing lateral retraction of soft tissue structures and optimizing postoperative visualization of the fusion site. The Slimplicity SOLO Anterior Cervical Plate offers one of the slimmest profiles available, […]

The SlimFuse® System is an innovative, single-hole-per-level anterior cervical plate system designed to meet the varying clinical needs of surgeons performing anterior cervical discectomy and fusion (ACDF) procedures. The system is able to accommodate rigid, semi-rigid and translationally dynamic options, all with a single set. It offers one through four-level plates with a single-step, integrated expansion […]

uNion-Brochure.Ulrich-Medical.pdf Features: Cervical plate for stabilization of the anterior cervical spine 2.0mm thickness at plate waist Standard and Midline plates available 4.0mm and 4.5mm diameters color coded screws in 12mm to 18mm lengths Screws available in self-drilling, self-drilling/self-tapping and rescue self-tapping designs Blocking mechanism restricts screw backout Titanium alloy implant material Streamlined, easy to use […]

The UNIPLATE® 2 Anterior Cervical Plate System is designed to simplify anterior cervical fusions through the use of a narrow midline plate and streamlined surgical technique. This unique system features one point of midline fixation per level for improved screw visualization, easier screw placement, and minimized lateral retraction. The UNIPLATE 2 Anterior Cervical Plate System […]

The Vertical In-Line Plate (VIP®) is an anterior cervical plate system with just one screw per level, allowing for a smaller incision and less retraction than standard ACDF systems. A single continuous bone interface ridge enhances the stabilization of a VIP® construct. Features: The low impact ACDF: The plate’s narrow width minimizes the amount of retraction […]