Dynamic Screw Systems

Hera Dynamic Rod is an implant with the following features: Allows  rotational and axial movement Prevents the upper segment degeneration The implants are compatible with all 5,5 mm rod systems Offers two different  options 5,5 and 6 mm in diameters and 60 to 90 mm in length Length is 90mm rods have in the hybrid […]

HPS Hybrid Performance System is designed to combine modern, rigid spinal fixation with a topping-off option. It results in less stress on adjacent segments and a reduced risk of developing adjacent segment disease, which causes new symptoms after spine surgery. The key element, the DSS® coupler, is the most efficient coupler available on the market […]

One of the first introduced semi-rigid rods is the Isobar TTLsystem (Scient’x USA). This implant has been used in Europe for over ten years and was granted FDA clearance for use as an adjunct to spinal fusion in 1999.Composed of a titanium alloy rod with a dampener element made of stacked titanium alloy o-rings, the […]

Compared with the traditional spinal fixation system,K-Rod II series solves the problem of the stress shielding effect. The feature of flexible cable rod is similar to the natural mobility of a human body, which can avoid degenerative lesions of adjacent vertebras. In addition to relieving the compressed nervous system, it can also provide dynamic stabilization […]

MPM system of dynamic ostheosynthesis is a unique modular plate with two holes which may be transformed from rigid to dynamic by a simple act of unscrewing of the plate by 180° made by the surgeon depending on pre-operative data as well as those acquired during the intervention (particularly in view of the quality of the […]

NFlex Stabilization System (Synthes Spine Inc., West Chester, PA)was designed to accommodate this physiologic motion via a bumper element that permits elongation and angulation during flexion and allows compression during extension. NFLEX.Brochure-DePuySynthes.pdf In the unaltered lumbar spine, flexion is necessarily coupled with elongation of the posterior segments; therefore, any device hoping to provide support through […]

nuMIS  is a low profile semi-rigid plating system offering flexibility in both product design and surgical technique.The nuMIS is approved for sales in the United States (510k) Benefits: Semi-rigid, low profile, plate allowing increased flexibility and load sharing with the anterior column. Easy to contour Exclusive washer design: Unique polyaxial bandclamp washer allows unlimited range […]

About Osimplant Osimplant has been founded in Ankara in 2005 for providing the best spinal implants and services for healthcare professionals. Osimplant quality system has been built to fulfil compliance for secure use of our implants; ISO 9001, ISO 13485 and 93/42/EEC. Providing high-quality spine surgery implants and services with regard to the needs of […]

PERFX-2 is a low profile Polyvalent Polyaxial Pedicle Screw System with rigid rod for spinal fusions and dynamic rods for dynamic stabilization indications, specifically designed to perfect the balance between motion and stability.The technology allows surgeons to create a dynamically instrumented transitional zone (i.e. topping-off) above a fused segment, controlling the range of motion of […]

SALUS is a Dynamic PEEK Rod with the following features: Provides semi-rigid fixation to bridge the gap between rigid and dynamic spinal constructs Uses rods made of polyetheretherketone, a semi-crystalline thermoplastic polymer that meets all biocompatibility requirements Dynamically stabilizes the affected segment while allowing for a streamlined surgical technique that preserves much of the natural anatomy […]

System-IV is an implant system, which relies on the pedicular fixation. The pedicular fixation (introduced by Prof. Raymond Roy-Camille in the 1960ties) belongs nowadays to the standard procedures in the spine surgery. In the System-IV instruments for the clinical application, no instruments for the preparation of the pedicle are foreseen. Surgeons, who will implant System-IV […]

Stabilimax Dynamic Spine Stabilization System, a device designed to provide stabilization while allowing for motion. Rachiotek LLC, a recently formed Delaware company, has acquired the assets of Applied Spine Technologies. Stabilimax NZ VIDEO ANIMATION The Stabilimax NZ is inserted through pedicle screws similar to those used for posterior lumbar fusion. The device is then attached […]

Spatial S3 system, provides a Semi-Rigid Osteosynthesis. It offers a choice between rods, bars and plates inside the same set and the possibility to choose the rigidity of the osteosynthesis during surgery A unique range of pedicular screws for the three options (S3, R6, TL) The same shared instruments. About Pedicle Screw/Rod–Based Dynamic Stabilization Devices […]

Socore Dynamic is part of a complete range for lumbar fusion and scoliosis that includes very “Low Profile” implants, rounded headSacral and ilio-sacral reinforcement devices, and rods Ø5,5mm Ti6Al4V and CrCo for scoliosis. The Flexible rod has the following Benefits: Dynamic Stretchable Resistant Wide range Standard screws About Pedicle Screw/Rod–Based Dynamic Stabilization Devices Dynamic stabilization […]

SmartLoc Dynamic System was launched by A-Spine as a posterior semi-rigid stabilization device, preserving mobility in the segment through their peek rods. About Pedicle Screw/Rod–Based Dynamic Stabilization Devices Dynamic stabilization is a surgical technique designed to allow for some movement of the spine, while maintaining enough stability to prevent too much movement. Pedicle-based dynamic devices […]

Compass Spine flexible system is available in mono and poliaxial versions. It is proven that our unique system is able to improve the BMD test numbers of the bone during the healing process, by which the recovery of the porotic bone is ensured. Benefits:– bone healing by micro-movements– flexible element fibres ensure the flexibility of […]

TDX Posterior Dynamic Stabilization is a posterior dynamic rod allowing natural movements in the treated segments of the lumbar spine. Together with the company’s SFS pedicle screws, also available with a hydroxyapatite (HA) coating to optimize bone fixation, the rods can be used for single level motion preservation treatment, or as an adjunct to fusion. The TDX Stabilization System is intended to […]

Weigao China’s largest manufacturer of implants and related surgical instruments for traumatology and spine surgery, offers a spinal stabilisation system called “Tulip”, which uses semi-rigid rods made from PEEK-OPTIMA® to bridge the gap between rigid and dynamic systems. The system is indicated when one to three levels of the spine, including the lumbosacral region, require […]

TRANSITION Stabilization System is a semi-rigid, posterior fixation solution providing unique biomechanical profiles. TRANSITION® offers multiple solutions to treat the patient’s clinical need and represents a significant step forward in the treatment of spinal conditions. TRANSITION® is only indicated for use when fusion with autogenous bone graft is being performed at all instrumented levels. TRANSITION […]

VEOS PE System from Innovspine provides a Flexible Osteosynthesis, The system includes a Rod made in peek optima for a flexible fixation, Screws with a Head monoaxial ‘low profile’, and a secure nut, providing an optimal fixation anchor. Implants – advantages : Versatile osteosynthesis system Hard with titanium rodS Flexible with PEEK Optima rod Polyaxial […]