Anterior Lumbar Buttress Plates

Designed to optimize ease of use and reduce operation time, the Binary Anterior Buttress Plate features a sophisticated locking mechanism utilizing proprietary Helios™ Technology. The locking mechanism resists both screw back-out and screw cou|nter-rotation, requires no additional steps for the surgeon once the screws are fully seated and provides an audible, tactile and visual confirmation that the screw […]

The Boundary Anterior Lumbar Buttress Plate is a fixation system used as a buttress of the interbody, to stabilize the allograft or autograft at one level during the development of a spinal fusion. The device consists in a plate shaped to conform to the anatomy of the anterior lumbar and lumbosacral spine (L1-S1) . Features: About Nvision BioMedical Technologies Nvision is a San Antonio-based medical […]

Our low-profile Balboa™ anterior buttress plate is a user friendly, one plate, and one screw device designed to prevent spacer migration. It features alignment grooves and fixation spikes to enable simple and secure fixation into the anterior spinal column. Features: About SeaSpine SeaSpine (www.seaspine.com) is a global medical technology company focused on the design, development and […]

The Butrex Anterior Lumbar Buttress Plating System utilizes the patented Resilient Locking Arm Technology to prevent screw back out, while providing repeatable and reliable results. The low profile design, and two point fixation ensures minimal disruption to the local anatomy and high cantilever expulsion resistance. The Butrex System also features an all-in-one drill guide with […]

The Cayman Plate Systems provide a simplified solution to address fractures, tumors, and degenerative conditions in the anterior and lateral spinal column. Distinguished by the innovative tifix Locking Technology, the Cayman Thoracolumbar Plates, Lumbar Plates, Sacral Plates, Buttress Plates, and Minimally Invasive Plates do not require any additional locking mechanism, as each screw head forms […]

The Fang anterior is a buttress Lumbar plate developed by Eminent Spine with a patented screw capture system- Screw will not back out due to typical linear force. Features: Broad plane span to prevent graft expulsion Large window for graft visualization Smooth contours for vessel protection 8 degree lordosis contours to spine, buttress against implant […]

The Kestrel® Buttress Plate System is an anterolateral vertebral fusion plate designed to resist migration or expulsion of interbody fusion devices. The plate features a bi-convex profile to match patient anatomy, large graft viewing window, and integrated fixation spikes to prevent rotation. Kestrel-SGT.Innovasis.pdf Kestrel-Brochure.Innovasis.pdf Features: 13° Conical variability 8° Pre-lordosed with up to 25° of […]

The RCS® Anterior Buttress Plate System is designed for temporary use in preventing allograft or autograft extrusion. It is also intended to provide stabilization and augment development of a solid spinal fusion. It is designed for fixation to the anterior portion of the thoracolumbar vertebral body. The construct may be employed alone or with other anterior, […]

The Reliance Buttress Washer System consists of washers, staples, and screws. The washers are available in six sizes, 15mm, 20mm, and 25mm diameters, as well as 15x20mm, 17x25mm, and 20x30mm. The self-tapping cancellous screws are offered in 4.5mm, 5.5mm, and 6.5mm major diameter and are available in lengths of 15mm, 20mm, 25mm, and 30mm. The […]

The Vail ALIF Buttress Plate System is offered in various device configurations based on surgical approach and patient anatomy, and will consist of a Vail buttress plate and screws that are inserted into the anterior surface of adjacent lumbar vertebrae. The Vail ALIF Buttress Plate System in conjunction with traditional rigid fixation is intended for […]