NEWS

The INERTIA® Pedicle Screw System is a top-loading comprehensive system intended to address numerous pathologies for the thoracic and lumbar spine. INERTIA pedicle screws are designed with a double-lead thread pattern allowing surgeons to advance the screws twice as fast as standard screws. A unique single-step screw closure mechanism minimizes the chances of cross-threading and […]

System Features: • Top-loading, Top-tightening, Self-tapping screws• Up to 60 degrees Variable Polyaxial Screws• 5.5mm Titanium Rod System• Dovetail Joint Set Screw Locking System™• Linear slot in set screw design that dramatically increases the holding forces while preventing set screw back out• Set screw design reduces risk of cross threading Zenius-Medyssey

System Features:• Top-loading, Top-tightening, Self-tapping screws• Up to 60 degrees Variable Polyaxial Screws• 6.0mm and 6.35mm Titanium Rod System• Dovetail Joint Set Screw Locking System™• Linear slot in set screw design that dramatically increases the holding forces while preventing set screw back out• Set screw design reduces risk of cross threading Illiad-Medyssey

PolyAxial Spine System  is marketed for the treatment of spinal pathologies (scoliosis, spondylolythesis, traum..) , the PASS LP® thoraco-lumbar fixation system allows to connect the rod at distance from the spine and to perform a 3D correction through progressive stress distribution on all anchorages thanks to the ST2R technique (Simultaneous Translation on 2 Rods). Benefits: […]

When implanted in the thoracic, lumbar, and/or sacral spine, the PILOT® Spinal System providesadditional support during spinal fusion. The PILOT® Spinal System consists of screws and rodsin a variety of shapes and sizes. The PILOT® Spinal System is manufactured from medical gradetitanium alloy and will be sold non-sterile.Benefits: Self-adjusting construct incorporates 20º of angulation to […]

The CONQUEST Thoracolumbar Spinal System is a comprehensive system intended to address numerous pathologies for the thoracic and lumbar spine. A variety of screws and hooks provide significant intraoperative options and reliability. Key Features:– Generous screw angulation to accommodate patient anatomy – Double helical screw thread allows for faster insertion without compromising screw purchase– Concerted […]

The NAUTILUS Thoracolumbar Spinal System is a comprehensive system intended to address numerous pathologies for the thoracic and lumbar spine. Implants and instruments are streamlined to provide the most efficient, reliable, and reproducible spinal system.Key Features: – Generous screw angulation to accommodate patient anatomy – Double helical screw thread allows for faster insertion without compromising […]

This thoracic and lumbar spine posterior osteosynthesis system was designed in close cooperation with French spine surgeons, based on the following philosophy: Find innovative technical solutions in order to ensure the reproducibility of the surgical act for the well-being and comfort of the patient. Easyspine surgical technique.pdf Benefits: Innovations  Unique self-contained connexion system  Self contained […]

The SpineTune® TL thoracolumbar pedicle screw system combines the flexibility of top-loading polyaxial screw systems and the security of sterile-packaged implants. SpineTune Brochure.pdf Features: +/- 30° polyaxiality The 60° angulation of the screw head offers greater flexibility in per-operative screw positioning in order to adapt the construct to the patient’s anatomy. Absolute reliabilityAll implants are […]

The Medacta® Unconstrained Screw Technology [M.U.S.T.] Pedicle Screw System has been designed to give the surgeon flexibility in terms of choice of bone anchor position, coupled with instrument handling capabilities that assist in spinal reduction, stabilisation and ultimately fixation.The M.U.S.T. pedicle screw features a range of motion of greater than 60°, which coupled with its […]

The Silverton Spinal Fixation System is intended for use in the thoracolumbar spine region and combines construct strength and stability with simple and intuitive instrumentation. The Silverton System offers optimized instrumentation that provides the surgeon fine tactile feedback for a better operating experience. The Silverton System is designed with innovative, unique implant features such as […]

Top-loading polyaxial pedicle screw system featuring the ability to accommodate titanium and CoCr rods of two different diameters. The screw thread pitch is designed to maximize both osteoporotic and dense bone fixation. The mixed metal tulip is designed to minimize head splay and allows for an improved biomechanical construct. EVEREST Degenerative One Page Flyer Benefits: […]

Top-loading polyaxial pedicle screw system with low-volume implants, featuring off-axis screw height adjustment. Provides state-of-the-art instrumentation, allowing for advanced distraction and reduction capabilities. Denali Degenerative.brochure.pdf Off-Axis Screw Height Adjustment Low-Volume Screw Housing Distinct Color-Coded Screws Clearly Indicating Length Variety of Easy-to-Use Reduction Instruments Torsional Rod Reducers Providing Translation & Reduction

The DELTA™ Spinal Fusion System employs unique proprietary technological advancements in poly-axial screw design which aids the surgeon’s placement of the screw, ease of construct installation and ultimately positive surgical outcome. All components are made of Ti6AI4V ELI, a Titanium based alloy, which complies with ASTM F136-98 Delta Brochure.pdf Features: Wide Bone Screw Angulation: Industry […]

Marauder™ Spinal Fixation System is a torque-less posterior fixation system with unique features. Two sizes of polyaxial screw bodies allow use in different locations in the spine. Screw angulation can be locked independently of the rod, resulting in more options for the surgeon to manipulate the anatomy. In addition, the screw can be placed in […]

The MIND™ Lumbar-Thoracic Spinal System is a new approach for the treatment of scoliosis. Rather than using long rods to span the length of a spinal deformity, often from the sacrum to the upper thoracic spine, MIND allows the surgeon to break the procedure down into smaller sections, using short rod lengths. This new approach […]

Perception® Spinal Fixation System is the first polyaxial screw system to combine a polyaxial screw and load sharing technology into a single implant. The screw angulation is locked independently of the rod, resulting in more options for the surgeon to manipulate the anatomy. Post operatively, the Perception® screw allows load sharing between the endplates and […]

The Malibu pedicle screw takes a systems approach to posterior thoracolumbar and sacral fusion. Every design detail, from the integrated locking cap, to the thread design, to the rod and screw interface, is optimized and complimentary to produce a system that is both clinically versatile and easy to use.The Malibu, UCR, NewPort Systems are intended […]

The Coral™ Spinal System is a fusion implant system used for the correction and stabilization of the thoraco-lumbar spine.The Coral™ Spinal System is comprised of a comprehensive implant offering and optimized instrumentation Components of the Coral Spinal System incorporate a number of features that make it unique enabling a lumbar surgery to require fewer implants […]

The Reed Pedicle Screw System provides a comprehensive range of screws, sizes and options to meet the challenges of modern day thoracolumbar spine surgery.The screw driver / screw connection has been specifically designed to ensure there is no toggle between the connection, allowing the surgeon to insert the screw with precision.Reed comes in a range […]

REVERE® is a thoracolumbar stabilization system with a full range of polyaxial screws, rods and connectors. REVERE provides convenience and ease of use in surgery to treat a variety of posterior lumbar conditions with simplicity. REVERE brochure.pdf Non-threaded Locking Mechanism:Eliminates cross-threading and may help reduce operative time due to faster insertion of locking caps  Optimal […]

UPASS II is the Minimally Invasive Fixation System from Shandong Weigao Orthopedic Device Company (“Weigao Ortho”) which is a medical device company in China specializing in the research and development, production and sale of spine, trauma and joint orthopedic implants. Benefits: True Percutaneous approach Support Multi-segment surgery

PROTEX® is a posterior stabilization system with a full line of polyaxial screws, rods and connectors. The self-tapping polyaxial screws provide 30° of angulation in all directions for maximum intra-operative adaptability. Benefits: Non-threaded locking mechanism: The locking cap design prevents cross-threading and captures the rod with 30° of rotation Provides choice in construct rigidity: Available […]

The BEACON® Stabilization System is a comprehensive posted screw system used in the treatment of trauma, tumor and degeneration in the thoracic and lumbar spine. The ability to medialize the rod allows for ideal placement of bone graft in posterolateral fusions. Pre-assembled clamps and connectors compensate for various screw angles with minimal rod bending. The […]

The ostheosynthesis system MPM-U®is a up-loading pedicular screw system, the screws are available in monoaxial, polyaxial, short and long head versions. The inner threads of the screws and nuts have been specifically developed and patented to prevent any case of nut loosening.The rod has a visual marking in order to identify the positioning of the […]

The VENUS® Spinal Fixation System is designed to address all thoracolumbar needs for a wide range of indications such as degenerative disc disease, degenerative spondylolisthesys, degenerative stenosis, scoliosis, kyphosis, spinal fractures, and spondylitis, as well as other conditions that need revision surgery. VENUS Spinal Fixation System Surgical Technique.pdf Throughout the design process, simplicity in design, […]

PERFX1™ isa comprehensive low profile pedicle screw system designed for strength, versatility, reliability and cost containment.Some of its key features include: YoutubeLink:Perfx1 Product Animation Benefits: PerFX-1-Eden Spine Low Profile  Polyaxial head (40°) for easy rod positioning  Excellent rod reduction capabilities  Double thread for secure anchoring  Intuitive & dependable instrumentation  Reduced instrument trays (2 vs. 4)  […]